The New Portable Combined Line Borer and Welder
Double-acting, portable hydraulic presses series PP make it possible to
disassemble and reassemble, on the workplace, chain sections (pins, bushings,
links), driving wheels, pulleys, rollers, gears, bearings, shafts, etc.
PP 50 and PP 100 are made up of the cylinder assembly and a manual or electric
pump.
PP 50S and PP 100S are formed by presses PP 50 and PP 100 plus "C"
- shaped support.
PP 50G and PP 100G are formed by presses PP 50 and PP 100 equipped with
tie-rods and yoke.
|
HEP 50
Hydraulic track press consisting of:
- PM 2 hand pump or PE 1 power-driven pump
- CP 50 double-acting hydraulic cylinder; ram thrust up to 50 ton
- 2 hoses (P/No.A00.84105)
- 2 quick half couplers, hose side (P/No.A00.84020)
- 2 quick half couplers, cylinder side (P/No.A00.84207)
|
|
HEP 100
Hydraulic track press consisting of:
- PM 2 hand pump or PE 1 power-driven pump
- CP 100 double-acting hydraulic cylinder; ram thrust up to 100 ton
- 2 hoses (P/No.A00.84105)
- 2 quick half couplers, hose side (P/No.A00.84020)
- 2 quick half couplers, cylinder side (P/No.A00.84207) |
HEP 50 S
Complete equipment for removal and installation of track pins, master
pins, bushings and master bushing. It consist of:
- HEP50 hydraulic press
- S50 basic tooling set plus the "C" frame |
|
HEP 100 S
Complete equipment for removal and installation of track pins, master
pins, bushings and master bushing. It consist of:
- HEP100 hydraulic press
- S100 basic tooling set plus the "C" frame |
|
HEP 50 G
Complete equipment for removal and installation of track pins, master
pins, bushings and master bushing. It consist of:
- HEP50 hydraulic press
- S50 basic tooling set plus the yoke |
|
HEP 100 G
Complete equipment for removal and installation of track pins, master
pins, bushings and master bushing. It consist of:
- HEP100 hydraulic press
- S100 basic tooling set plus the yoke |
|
