The MTP-230 Track Press is the ideal machine for disassembling and assembling the track links of small to medium size bulldozers and excavators. It is efficient and easy to operate, which decreases the time required to turn the pins and bushes, or to completely replace the track link parts. This is one of the main machines in the undercarriage repair workshop.

The major features are as follows:

This press is applicable to tracks of Komatsu D155 and Caterpillar D9 class tractors.

The fixed jaw table on the MTP-230 is of a rugged one-piece cast steel structure, resulting in remarkably long durability.

A single lever can control "in and out motion" of the rams not only on either side respectively but also on both sides simultaneously. This helps the operator speed up assembling to a great extent.

This press has a longer ram stroke and it allows the use of 100 series safety toolings. It is no longer necessary to hold the link by hand while assembling with 100 series toolings. It provides the equipment with more safety and more working efficiency.

A single lever controls both the raising and lowering of the table and the indexing of the link. Further, an adjusting rod and nut are provided for fixing the proper indexing pitch according to the link of the tractor models. This makes the track press much faster.

The winch control lever is now located very close to the winch to facilitate the operators job though it was located near the main equipment operating levers.

Ram return speeds up twice as fast as that in former model WN-200. As a result, it cuts down job time exceedingly.