93 kW output motor delivers 125 horsepower for accurate testing and adjustment for optimum performance of hydraulic components.

Designed for in-shop testing of hydraulic: pumps, motors,cylinders, valves, transmissions and torque converters.



Outstanding Features of MH-125D

The MH-125D is capable of testing a variety of hydraulic components of various machine manufacturers.

The tester can continuously supply a large volume of oil at a maximum pressure of 41.2 MPa (420kgf/cm2)

The hydraulic line of the MH125D is seperated into 2 systems. One system consists of the main pump and motor, which drives the tester and the other system supplies the component to be tested. The systems have seperate oil tanks, preventing the mixing of abrasive particles into the main tank from the test component. This improves the durability of the tester.

Safe operation is achieved with the operating position of the tester being square against the rotating plane of the test component shaft.

A hydraulic pressure servo controller for the test components is built in the tester. Two systems can be operated if the pressure is under 14.7 MPa (150kgf/cm2). Electric servo controllers can be built in, as an option, to easily test hydraulic components with electric type servo valves.

Accurately adjust the repaired or reconditioned hydraulic component for optimum performance.

Open type pumps (gear and vane pumps), closed pumps and also plunger pumps with weak suction can easily be tested by the built in variable pressure booster. Even a synchronous twin pump can easily be mounted on the test bench.