CYLINDER REPAIR
HCS-30-CE-EX HYDRAULIC CYLINDER SERVICER
(Conformite Europeene)
This model utilizes a 5 HP Hydraulic Power Supply to operate its Hydraulic Torquer, Rod Extracting Cylinder and Hydraulic High Torque Nut Runner to provide maximum productivity for the busy repair facility.
SPECIFICATIONS:
Maximum Cylinder Length - 19 ft. (5.79m)
Maximum Cylinder Diameter - 12 ins. (406 mm)
Maximum Available Torque - 30,000 lb/ft. (4150 kg/m)
Maximum Rod Extraction Force - 7 Tons
Rod Extraction Speed - 4 ft. in 20 sec. (1219 mm/20 sec.)
7 RPM Hydraulic Nut Runner Produces 4000 lb/ft. Torque (553 kg/m)
Electric Pump - All Voltage, 50/60 Hz - 3 Phase, 5 HP
Push Button Pendant Control with 30' of Cable
Special features exclusive to HCS-30-CE-EX:
# 19520 Manual Valve Package
Eliminates quick coupled hose changes between nut runner and torquing cylinder.
# 980 Low Torque Monitor
Attaches to nut runner to read very low torques accurately.
# 19516 Telescopic Drip Pans
Provides drip pan between bench and extended headstock. Retracts automatically when headstock retracts.
#965 Extra Large Universal Wrench
Extra large Universal High Torque Wrench attaches to hex piston retaining nuts requiring 25,000 ft. lbs. or torque or less. Fits nuts 4" to 6 1/2" across flats.
#909 V-Block Chuck Wings
For mounting cylinders in servicer chucks when the cylinder or rod does not have a pin bushing.
# 906-25 Universal Ball Joint Chuck Adapter
Used to mount piston rods terminating in a female ball joint to the servicer T-slot chuck.
# 908 Headstock Blank Chuck Adapter
For mounting fork lift and other cylinder flanges to servicer headstocks
#907-23 Tailstock Blank Chuck Adapter
For mounting special configurations of rod ends to servicer tailstock.
Standard with the HCS-30-CE-EX:
1 - Power Unit
1 - Nut Runner & Nut Runner Motor
1 - Nut Runner Spline Coupler & Snap Ring
1 - Hydraulic Ram Assembly
1 - Headstock Toggle Assembly
2 - Safety Straps 6' Long
28 - Mounting Anchors, Washers, Bolts, & Setting Tools
2 - Torque Tracks 15' long
1 - Allen Wrench Set (3/4” - 5/8” - 3/8” - 1/4" - 1/16”)
1 - Spanner Pin Set
1 - Universal Spanner Wrench
3 - Torquer Bars
1 - Drum (cut in half)
1 - Drum Dolly
2 - 1 1/2-6 x 18" Threaded Rod & Nuts for #913 Wrench
1 - 1 1/2-6 x 18" Threaded Rod & Nuts for Machine
4 - Lock Blocks for Tracks
2 - Lock Blocks for Tailstock
1 - Operations Manual
1 - #913 High Torque Wrench
1 - Nut Runner Motor Loop Hose 32" Long
2 - Nut Runner Extension Hose 250" Long
2 - 3 3/4" Cones with 1 1/2" Adapter
2 - 6" Cones with 1 1/2" Adapter
2 - 3 3/4" Cones with 2" Adapter
2 - 6" Cones with 2" Adapter
