CYLINDER REPAIR
HCS-2520-CE-EX HYDRAULIC CYLINDER SERVICER
(Conformite Europeene)
A manual model, offered as a lower cost alternative to the models with automatic hydraulic functions. Similar to the HCS-25-LS-CE-EX, but needs only compressed air to function, without any electrical requirements. The HCS-2520-CE-EX is designed to service cylinders 26 ft. (7.9m) in length and 22 in. (558.8mm) in diameter.
SPECIFICATIONS:
Maximum Cylinder Length - 26 ft. (7.9m)
Maximum Cylinder Diameter - 22 ins. (558.8mm)
Maximum Available Torque - 25,000 lb/ft. (3457.5 kg/m)
Maximum Rod Extraction Force – 5 Tons
Rod Extraction Speed – 33 sec./ft.
Requires Compressed Air
Special features exclusive to HCS-2520-CE-EX:
# 19516 Telescopic Drip Pans
Provides drip pan between bench and extended headstock. Retracts automatically when headstock retracts.
#909 V-Block Chuck Wings
For mounting cylinders in servicer chucks when the cylinder or rod does not have a pin bushing.
# 906-25 Universal Ball Joint Chuck Adapter
Used to mount piston rods terminating in a female ball joint to the servicer T-slot chuck.
# 908 Headstock Blank Chuck Adapter
For mounting fork lift and other cylinder flanges to servicer headstocks
#907-23 Tailstock Blank Chuck Adapter
For mounting special configurations of rod ends to servicer tailstock.
Standard with the HCS-2520-CE-EX:
1 - Hydraulic Ram Assembly
1 - Headstock Toggle Assembly
1 - 10” Cylinder with Top and Bottom Yoke
1 - Air/Hydraulic Foot Pump
1 - 10” Cylinder
2 - Safety Straps 6' Long
36 - Mounting Anchors, Washers, Bolts, & Setting Tools
2 - Torque Tracks 20' long
1 - Allen Wrench Set (3/4” - 5/8” - 3/8” - 1/4" - 1/16”)
1 - Spanner Pin Set
1 - Universal Spanner Wrench
1 - Torquer Bar
1 - Drum (cut in half)
1 - Drum Dolly
2 - 1 1/2-6 x 18" Threaded Rod & Nuts for #913 Wrench
1 - 1 1/2-6 x 18" Threaded Rod & Nuts for Machine
4 - Lock Blocks for Tracks
2 - Lock Blocks for Tailstock
1 - Operations Manual
1 - #913 High Torque Wrench
2 - 3 3/4" Cones with 1 1/2" Adapter
2 - 6" Cones with 1 1/2" Adapter
2 - 3 3/4" Cones with 2" Adapter
2 - 6" Cones with 2" Adapter
